Showing posts with label apache labs. Show all posts
Showing posts with label apache labs. Show all posts

Monday, March 21, 2016

XW2 CAMSAT Satellite




FO-29 (JAS-2)

Some Detail: http://www.amsat.org/?page_id=1024

FO-29 was in well today during a near over-head pass.


AO-73 BPSK Decoded

(click to zoom)
Using: http://www.amsat.org/?page_id=2039 "Funcube Dashboard"




Wednesday, March 16, 2016

Apache Labs - Hermes - Hears NP4JV AO-73

AO-73 "Funcube-1" satellite flew by tonight and I heard NP4JV for most of the pass.

Details on this bird: http://www.amsat.org/?page_id=2039

Video of this pass:



Apache Labs - Hermes - Hears Birds

For almost the entire winter I've been playing around with building beacons, and using various forms of up and down-conversion of RF signals in all sorts of tests.  Mostly I'm just trying to learn more, and learn how various 'tweaks' can make a difference with my various RF projects.

The past few days I've been returning to playing around with my Apache Labs "Hermes" SDR.  This little software defined radio never ceases to amaze me.

It's funny to me how so many of my projects I putz around with can somehow intermingle with each other.  If you follow this blog then you know I've been recently playing around with Arduino's to accomplish things like acting as a CW beacon, used as an LO in a RF chain, or used as a device to read and display RF Power levels.  These things can be used with so many projects and they're seriously cheap.  The Arduino UNO I'm using cost me < $20 USD, and the Si53531A Etherkit breakout board is super handy for generating RF signals between 0 and 160 MHz (and a little higher).

So...I decided since I was waiting for money and parts to work further on my multi-band beacon project that I'd reuse some of that stuff to make a simple down-converter actually it's able to operate as a full transverter.   Meaning for example, if I want to operate on 145 Mhz I connect an antenna for that to a mixer's RF port.  Then I connect the output of an Arduino driving the Etherkit board at 100 MHz as an LO into the LO port of the Mixer.  The IF port connects to the Apache Labs Hermes SDR.  And wha-lah!  I can receive from about 128 MHz to about 160 MHz.  

This morning I was listening to aircraft between 128-135 MHz roughly.  

All afternoon I was listing to 2 meter repeaters around 146-147 MHz, and then 911 Dispatchers 154 MHz (around here).  

This evening I decided to see if I could hear any Satellites.  And sure enough I copied NOAA-18 easily during one pass around 137.620 MHz.

After that I listened for CAMSAT which is "XW2" and I heard that as well.  Here is a video of XW2 reception.

It's kinda long, and it's a little noisy and the signal was fairly weak.  But even CW-Skimmer was able to copy "CAMSAT" and "XW2" down in the noise.

So it's actually hearing pretty darn well.  My antenna is just an omni 25-1300 MHz "Discone" up about 20 feet on a chimey.  Nothing fancy there, and about 45 feet of LMR-400 Coax.  Just real basic listening stuff.

I'm using an LNA-3000 which is good from DC-3GHz.  It's good for about 18dB roughly.  But I probably really don't need that, especially where it's mounted down in next to the radio.  BUT anyway... :-) (I like to play)

Here's some helpful 'stuff' for tracking and listening for this stuff:








Tuesday, March 8, 2016

Apache Labs - Hermes TUN 10m vs. 6m

I haven't used my Apache Labs "Hermes" Board for Transmit much since I purchased it a few years ago.  I've most just used it for a multi-band CW Skimmer Receiver.

I've been starting to build it up for use as a Transverter "IF" and I'm noticing some odd behavior on 6m (50 Mhz) which doesn't occur on HF bands at all.

When I key up on CW or use "TUN" on 6m there's a Sweep to the RF output.  You can see an example of this below where it's sweeping on 6m, and NOT on 10m.

In the images below there are some 'other' artifacts which occur on my primary radio in the presence of strong local RF.  That is not the 'sweep'.  I'm talking about the RF shift noted in the lower box of the 6m image, and not seen in the 10m image below it.

I've also noted that when I reset the 'database' in PowerSDR that until I turn off PowerSDR the first time, 6m behaves just like all the other bands.  (At least I'm pretty sure of this).  On subsequent restarts of PowerSDR the little sweep, and reduced output on 6m is observed.  I thought at first that it was my 5vdc supply dipping in power.  But it's not.  So I'm just a bit confused by what's happening.

Anyone with ideas please comment below.

These images of screen shots of HDSDR where my FTDX-5000 is connected to an AirSpy and SpyVerter via it's 9Mhz IF out.  Note the 1KHz shift in the first image.


Note the little "1KHz Sweep" at TX start, it can be see in the LOWER box above at the bottom of the image.

Note on 10m no little "Sweep"

UPDATE

So turns out this is related to a software 'thing'.  I had set Hermes Sample rate at 384K, instead of the default 192K.  I discovered this after I reset the 'datebase' a few times, and fiddled with settings until I found the one that made a this happen.

Apparently this is sort of a known issue, and I'm not supposed to use 384K until they've resolved the Ethernet up to 1Gb instead of 100 Mb.  So for now I'm using all the other settings I had set, except I've reverted this setting back to 192K. 

And it seems to work fine on 6m now.

Wednesday, February 3, 2016

Etherkit Si5351a beacon and another used for LO down converter

Today I wanted to see my 144 MHz Arduino / Etherkit Si5351a beacon on a different radio.

To do this was fairly simple.  I used my Apache Labs Hermes SDR by feeding it's RX input from the IF output of a simple Mixer.  I used one of my Arduino / Etherkits as a 120 MHz LO.  And the other Adruino / Etherkit as a 144 MHz (2 meter) CW Beacon.

Here's how that went.



http://blog.dxers.info/p/arduino-multiband-beacon.html