My plans are to play around with creating a multi-band beacon which emits 15dbm ( or about 31.6 mW) CW.
Once I've managed to do that the obvious extension to me is to try to implement some of my previous work with "CDAR" using the HackRF as the radio.
At this point this is just something to play with this winter. I like to have little projects to putz around with when it's too cold outside for anything else. (read: helps avoid cabin fever :-)
I'll post findings as I go here.
-------------------------------------------------------------------------------------------------------------------
From this GreatScottGadgets site this is what it says about this device:
==================================================================
"HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 10 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
- 10 MHz to 6 GHz operating frequency
- half-duplex transceiver
- up to 20 million samples per second
- 8-bit quadrature samples (8-bit I and 8-bit Q)
- compatible with GNU Radio, SDR#, and more
- software-configurable RX and TX gain and baseband filter
- software-controlled antenna port power (50 mA at 3.3 V)
- SMA female antenna connector
- SMA female clock input and output for synchronization
- convenient buttons for programming
- internal pin headers for expansion
- Hi-Speed USB 2.0
- USB-powered
- open source hardware"
=================================================================
No comments:
Post a Comment